Drum-capacity options
Listed drum choices run from 6 to 16 m³. Select the working capacity together with the completed vehicle’s rated load.
Mixer & Special Trucks
Concrete Mixer Trucks
Keep concrete moving between the plant and discharge point with a mixer truck specified for your delivery operation. The range offers 6×4 and 8×4 chassis, several drum capacities and hydraulic mixing equipment for ready-mix plants and construction projects.
Availability by Inquiry
Tell us the working task, required capacity and destination for photos and a quotation.
PRODUCT HIGHLIGHTS
Concrete delivery from batching plant to job site.
6×4 & 8×4 chassis
Two chassis layouts give buyers options for plant output, delivery routes and site access.
Mixing & daily servicing
The typical build uses a wear-resistant alloy steel drum and mixing blades, with a water system for daily operation.
Key Specifications
Typical configurations and options are shown below. Your quotation confirms the selected build and included preparation work.
Typical Configuration
| Parameter | Typical / Optional Configuration |
|---|---|
| Chassis Brand | HOWO / SHACMAN / SANY |
| Drive Type | 6×4: 8–12 m³ / 8×4: 12–16 m³ |
| Engine Power | 6×4: 340–380 HP; 8×4: 380–420 HP |
| Mixer Drum Capacity | 6 / 8 / 10 / 12 / 14 / 16 m³ |
| Drum / Blade Material | Wear-resistant alloy steel drum; 5 mm wear-resistant mixing blades |
| Charging Rate | ≥3 m³/min |
| Discharge Rate | ≥2 m³/min |
| Residual Rate | ≤0.8% |
| Water Tank | 300–800 L; pneumatic water supply |
| Application | Ready-mix plants, construction sites, tunnels and water projects |
Best Suited For
Concrete DeliveryConstructionInfrastructure
PREPARATION & VERIFICATION
Workshop preparation you can review before shipment.
Review the selected truck and included workshop work with our Liangshan team before shipment.
Vehicle reconditioning
- Assessment of the engine, transmission, axles, chassis and cab.
- Repairs, adjustments and component replacement based on vehicle condition.
- Brake, steering, electrical and hydraulic work relevant to the selected truck.
Order-specific remanufacturing
- Vehicle or component projects with an identified scope.
- Repair, rebuild or replacement work itemized for your order.
- System checks and final review against the agreed work.
Before the truck leaves our facility
Review the selected truck’s actual photos, completed work and available inspection or test records. For this vehicle, agree checks for the fitted body, pumps, hydraulics or working equipment as well as the chassis.
Remanufacturing covers agreed vehicle or component projects; it does not mean every component is new.
Related Models
Representative imageTruck-Mounted Cranes
Combine cargo transport and on-site handling in one vehicle.
- Typical crane type
- Straight telescopic boom / knuckle boom
- Typical rated lifting capacity
- 5 / 8 / 12 / 14 / 16 / 20 t
- Supply
- Contact for current options
Representative imageAerial Work Platform Trucks
Bring crews and tools to streetlights, building facades and utility work areas with a truck-mounted platform.
- Typical working height
- 14 / 18 / 20 / 22 / 28 / 32 m
- Typical platform capacity
- 200 / 300 / 400 kg
- Supply
- Contact for current options
Representative imageWater Sprinkler Trucks
Support municipal spraying, landscaping and construction-site dust control with a water sprinkler truck.
- Typical tank capacity
- 8 / 10 / 12 / 15 / 20 / 25 m³
- Typical chassis brand
- HOWO / SHACMAN / Dongfeng
- Supply
- Contact for current options
GET A QUOTE